Hey Cayenne here and today I going to inject you with knowledge on Fuel, Fuel Injection that is;  so let's get barkin' on this subject and watch my video below!

Los Altos residents know that engines need to burn fuel to operate. Fuel is pumped from your fuel tank to your vehicle engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.

There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with air—before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the vehicle engine.

Direct injection engines burn fuel more efficiently than conventional vehicle engines. Some models can deliver the power of a V8 with the economy of a V6.

For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same gas mileage. The turbocharged version delivers 350 horsepower.

Why the big difference in power? Direct injection systems allow fuel to be squirted into the vehicle engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions.

Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the vehicle engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization. Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.

When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy as well as delivering less power to the engine.

Los Altos residents should understand that fuel injectors are not cheap to replace. Direct injection fuel injectors are even more . And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.

So keeping your fuel injectors clean is just good auto advice. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance. Cleaning additives in your fuel can also help.

If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, Los Altos drivers will enjoy better fuel economy and their fuel injectors will last for a long time.

Contact Allied Auto Works for more tips to help you improve your performance and safety and tell them Cayenne sent ya!

Allied Auto Works
2073 Grant Road
Los Altos, CA 94024
650.968.7227
http://www.alliedautoworks.com

Hello CA!  Duke Here and  today's vehicle care topic is: Synthetic Oil vs. Petroleum Based Oil.  So let's watch my video below and bet barkin' on this slick subject!

Synthetic motor oil is a substitute for petroleum based oil. If you aren't currently using it, why not? Synthetic motor oil maximizes engine power and fuel economy. To see why, we'd need a microscope, so we'll have to settle for using our imaginations. The molecules of conventional motor oil are long hydrocarbon chains. Synthetic motor oil, on the other hand, has uniform, round molecules. Which is slipperier, a pile of pencils or a pile of marbles?

Synthetic motor oil lubricates better because there's less friction. This results in myriad benefits: better wear protection, cooler operating temperatures, more power and better fuel economy. And synthetic oil doesn't sludge up like conventional oil so it prevents those small oil passages from clogging up. (We see that too often at Allied Auto Works in Los Altos.)

Some manufacturers are extending oil change intervals for many models. The added protection of synthetic oil covers you for these longer intervals. Talk with your Allied Auto Works service advisor about how you drive in and see if he thinks you can benefit from synthetic oil for your vehicle. Also ask about the appropriate oil change interval for synthetic, because it may very well be longer than for conventional oil.

Most of us have a busy life and occasionally miss an oil change; go ahead, admit it. Since we're not perfect, doesn't it make sense to use a motor oil that's got your back?

What about price? Petroleum based oil may appear to win out on this point, but let's consider all the facts. Although synthetic oil costs more, it lasts longer, protects your vehicle engine better and increases fuel economy. You'll likely save money in the long run. If you're serious about making your vehicle last longer, consider using synthetic motor oil.

Give Allied Auto Works a call today and tell them Duke sent ya!     

Allied Auto Works
2073 Grant Road
Los Altos, CA 94024
650.968.7227
http://www.alliedautoworks.com

What time is it?  Maybe it's time for your PCV Valve to be replaced.    Cayenne here and today we will bark about when is it time to replace the PCV Valve.  So let's watch the video below.

The crankcase is the lower part of the engine where the crankshaft is housed and where the engine oil lives. The crankshaft is connected to the pistons that power the engine.

When you are diving around Los Altos, fuel is burned in your vehicle engine, it pushes the pistons down and the crankshaft rotates and sends power to the transmission. Some of the explosive gases from combustion squeeze past the pistons and down into the crankcase.

Now this gas is about 70% unburned fuel. If it were allowed to remain in the crankcase, it would contaminate the oil and quickly turn it to sludge. Sludge is like Vaseline and clogs passages in the engine, leading to damage.

Also, the pressure build up would blow out seals and gaskets. So in the old days, there was just a hose that vented the crankcase out into the air. Obviously, not good for our air quality in Los Altos, CA.

Enter the PCV valve. It's a small, one-way valve that lets out the gases from the crankcase and routes them back into the air intake system where they are re-burned in the engine. Fresh air comes into the crankcase through a breather tube. This makes for good circulation in the crankcase. And that gets the air out. As you can imagine, however, the valve gets gummed up over time.

Your vehicle manufacturer usually recommends they be changed somewhere between 20,000 to 50,000 miles/30,000 to 80,000 kilometers. Unfortunately, PCV valve replacement is left out of some vehicle owner's manuals, but your friendly service advisor Matt or Travis at Allied Auto Works, we will make sure your PVC is replaced if needed.

Happy Motoring

Cayenne           

Allied Auto Works
2073 Grant Road
Los Altos, CA 94024
650.968.7227
http://www.alliedautoworks.com

Duke here and do you know what TSB stands for?  No, it's not for Tasty Sirloin Bone even though that sounds good to me!  TSB is short Technical Service Bulletins and today we will bark on what this can mean for you and car, so let's get that barkin' going.

If your vehicle had something in its design or production that the manufacturer had figured out had an unanticipated problem, you'd want to know about it. And you'd want it fixed. There is something that can help drivers with just such a scenario. It's called a Technical Service Bulletin, or TSB.

Here's what a TSB is. Vehicle design and manufacturing is a very complex process. Aftrer every vehicle is introduced, the more units there are on the road, the more likely weaknesses in parts or design will start to show up.

Automakers gather data on the issues and how best to fix them. Then they send out TSBs (usually in the first year of the new model) so technicians will know to look for those problems and what to do about them. There may be more than one cause of a problem with a vehicle so there may be more than one TSB for an issue.

A TSB can be issued for anything from failing water pumps to strange noises to smelly headliners. A TSB and a recall aren't the same thing. A recall is issued if there's a problem that could cause harm to people or if it creates illegal emissions. The manufacturer pays for a safety defect to be fixed, and the repair is usually performed at a dealership.

But when a Technical Service Bulletin is issued, it's because there's a pattern of some system not working the way it should. If a vehicle is under warranty and the problem can be diagnosed in a specific vehicle, the manufacturer will probably pay for the repair. But there may be limits. Take one case with certain models of a minivan. Some wheel bearings were failing prematurely, so the manufacturer extended the warranty on them to 5 years or 90,000 miles/145,000 km. After that, the owner bore the cost. In some cases, a manufacturer will reimburse owners for a repair already done at an independent service facility.

You may have a vehicle that is no longer covered by a warranty but a TSB has been issued for a certain problem. In that case, any service facility can perform the service. At Allied Auto Works, your service advisor will have access to TSBs that have been issued for your vehicle's year and model. They will help the technician diagnose it if your vehicle has the issue. The TSB will also have advice for the best repair procedure to get your vehicle working the way it should.

Now I am off the the TSB  Cafe for Dogs and yes that does stand for Tasty Sirloin Bone!  

This is the Duke    

Allied Auto Works
2073 Grant Road
Los Altos, CA 94024
650.968.7227
http://www.alliedautoworks.com